Dresser Up-cycle

Dresser Up-cycle

What I used:

-Paint

-2 Paint brushes

-Sand Paper

-Kilz

-Clear Polyurethane Satin

1: I  removed  the  top  drawer  and  pulled out the  track. Then I sanded down the ruff edges.

2:   Making sure there is no dust start by painting the dresser with Kilz.  Make  sure  you are  outside  it  will smell really bad!

3: Make sure you give the Kilz plenty of time to dry, then,  you can start with the paint. 

4: Second coat, once the first layer has dried fully do one more.

5: Once the second coat is fully dry start with the Polly, make sure that you use even strokes to keep it smooth. Again make sure you are in a VERY WELL Ventilated area.

6: Add one more layer of polly. After this layer has dried leave the piece of furniture outside over night to allow the smell to leave the piece. 

And there you have it! Hope your project turns out!

~Kylie